Wall-mount Dimmer LW10

Use WALL-MOUNTED MODULES to replace your current wall switches and operate your lights and appliances either manually or through X-10 control over the powerline The wall dimmer switch is the same size and fits in the same way as a standard UK single gang light switch. Replaces any normal dimmer for X10 control of branch lighting circuit rated between 60 W and 300 W. A neutral connection is NOT required! Works with X10 controllers and momentary action wall switches - including "designer" wall switches. Wall Dimmer: 300 watts max. Can also be used like an ordinary dimmer. When the unit is turned off from a dimmed position, it will always return to full brightness the next time you turn it on. Supply voltage: 230 V +10% -15% 50 Hz Supply current : < 15 mA capacitive Making capacity: 60 to 300 W (incandescent lamps only) Regulating time: 3.7 sec ±0,2sec from fully on to off EMC emission: according to EN 50081-1 EMC immunity: according to EN 50082-1 Electrical safety: according to EN 60950 and EN 60065 Signal sensitivity: 15 mVpp min 50 mVpp max at 120 kHz Fuse: 2 A Connections: screw type terminals for phase and switched phase. Ambient temperature: - 10° C to + 50° C (operation) -20° C to + 70° C (storage)