Advanced Home Security and Management System
The PowerMax+ is a user and installer friendly, 30 zone fully supervised wireless control system. The system is design to function in a way that appeals to the user but also offers features that makes installers lives easier than
ever before:
Easy to install
- Plug-in terminal blocks can be wired while detached from the unit
- Quick attach-detach TELCO sockets for telephone line and X10 controller. Terminal block for telephone line
- Special wall mounted bracket permits installation without having to open the unit's cabinet
- Optional plug-in RS232 module for local computer
Easy to maintain
- Status, alarm memory and trouble data are displayed upon request
- Diagnostic test provides visual and audible indication of the signal level of each detector
- Remote control and status verification from distant telephones
- Event log stores and displays information on 100 past events
- Upload/download from distant computer via telephone line and modem
Quick Programming
- Multiple choice selection of options for each parameter
- Unequivocal visual prompts and audible signals
- Installer access to the user menu
Kit Includes
- Panel
- Power Supply
- Manuals
- Remote FOB - MCT234 - 868Mhz
- Magnetic Door Contact - MCT302 - 868Mhz
- Next K9-85 Pet PIR 868Mhz
- All fixings and Batteries
To allow the unit to send X10 signals and control lights and appliances you additionally need to purchase an XM10U or XM10E and a 1-1 RJ11 cable
FAQ
- The manual states to perform a diagnostic test every week. It is important to note that sensors must not be tripped within 2 minutes of starting this test, and that they also "sleep" for 2 minutes after the test starts - so
you must start the actual walk test up to 4 minutes after you have set the test up on the system
- The manual states that upon an alarm condition you can have the unit send X10 to a lamp module and this can either be turned on, or made to flash. This is incorrect. Currently you are only able to turn the lamp on. Not make
it flash
