Phase Coupler / Filter

Couples X-10 signals across phases for use of the X-10 system in a multi-phase installation. Filters X-10 signals from the mains, to prevent signals come into or go out of the property. Can be used to suppress interference of heavy loads on the mains (heavy tools, etc.). Heavy duty design: 63A, 230V. FEATURES With the FD10 Phase Coupling Filter X-10 signals can be transferred from one phase to another. The Marmitek X-10 system can be used in installations with 3 phases, in which wall sockets and switches are divided over more phases. X-10 signals are often coupled by the way a 3-phase system is constructed, or by any connected appliances in the house. When the signals are not coupled across the phases, this needs to be achieved with a FD10 Phase Coupling Filter. For full coupling of all 3 phases, 3 FD10 Phase Coupling Filters are required. The FD10 Phase Coupling Filters can be placed directly behind the main switch at the distribution panel. Phase and Neutral need to be available before the module can be installed. When using multiple filters in a multiple-phase system, all coupling filters need to be interconnected with a single wire. FD10 Phase Coupling Filters also adjust mains impedance inside a property compared to outside, which enhances the transmission of X-10 signals. This configuration is ideal for use in showrooms and other rooms close to areas where heavy machinery is used.