|
 
|
MicroModule AWM2 | |
| |
AWM2 MicroModule | £57.50
|
| |
| Extremely small size (46x46mm and only 16 mm thick)
Built-in appliance module with 16A rating
Relay holds last state on power loss
Low noise relay
Two way X-10 communication
Able to change internal ON/OFF state by global commands like ALL LIGHTS ON and ALL UNITS OFF to stay in "sync" with modules to which it is configured
HouseCode, UnitCode and settings can be simply programmed with every X-10 compatible controller (e.g. Marmitek 8in1 in combination with TM13 transceiver)
Improved S/N ratio for reliable X-10 communication
Power/Status/Configuration LED
Remote ON/OFF control of electrical loads
Provides powerline carrier control to existing light switches
Transforms conventional switches into an X-10 transmitter
Full control of all your X-10 modules by conventional switches
Choose your own brand, design and color for switches and wall sockets
Place X-10 modules out of sight
Turn every existing wall socket into an X-10 controlled wall socket
Ideal for installation into light fixtures, home appliances and other limited areas
Install two-way switches without any additional wiring between switches (Marmitek MicroModules transmit their status to other MicroModules through the power line).
Use a conventional switch on a fixed location to execute Macro's
Note that Positive and Neutral are required for operation of this unit.
MicroModules require an X10 transmitter to set their internal address (they do not have Code wheels like the older modules). The cheapest CE Approved transmitter to do this is the SD7233. Note that the CM12 is not able to set a MicroModules address
|
| | |
| Payment Methods |
| American Express, MasterCard, Visa, Solo, Delta, Switch, Maestro, Visa Electron, Cheque |
|
