|
 
|
Wall-mount Dimmer LW10 | |
| |
Wall-mount Dimmer LW10 | £21.00
|
| |
| Use WALL-MOUNTED MODULES to replace your current wall switches and operate your lights and appliances either manually or through X-10 control over the powerline
The wall dimmer switch is the same size and fits in the same way as a standard UK single gang light switch. Replaces any normal dimmer for X10 control of branch lighting circuit rated between 60 W and 300 W. A neutral connection is NOT required!
Works with X10 controllers and momentary action wall switches - including "designer" wall switches.
Wall Dimmer: 300 watts max.
Can also be used like an ordinary dimmer.
When the unit is turned off from a dimmed position, it will always return to full brightness the next time you turn it on.
Supply voltage: 230 V +10% -15% 50 Hz
Supply current : < 15 mA capacitive
Making capacity: 60 to 300 W (incandescent lamps only)
Regulating time: 3.7 sec ±0,2sec from fully on to off
EMC emission: according to EN 50081-1
EMC immunity: according to EN 50082-1
Electrical safety: according to EN 60950 and EN 60065
Signal sensitivity: 15 mVpp min 50 mVpp max at 120 kHz
Fuse: 2 A
Connections: screw type terminals for phase and switched phase.
Ambient temperature: - 10° C to + 50° C (operation)
-20° C to + 70° C (storage)
|
X10 dials | |
| Payment Methods |
| American Express, MasterCard, Visa, Solo, Delta, Switch, Maestro, Visa Electron, Cheque |
|
