|
 
|
Din Dimmer LD11 | |
| |
| £32.90
|
| |
| Dimmer for installation on DIN Rail. Switches
and dims lighting circuits up to 700W. Suitable
for 230V and low-voltage lighting with a
transformer, including halogen lighting. Remote
control via the mains using Marmitek X-10
Commands and with one or more momentary
switches. Can be used in combination with
‘designer’ switching material. Soft start and
smooth dimming features, remembers the last
dim setting. Can be regulated from 0% lighting
to the desired dim setting.
FEATURES
With the LD11 DIN Rail Dimmer you can control and dim lights using the Marmitek X-10 system. The module can be
operated with Marmitek Remote Controls, Wireless Switches, Timers, PC, etc.
There are terminals for external momentary switches (of any type or brand), which means the LD11 can also be
operated manually and used in two way switch schemes. Momentary switches attached to the LD11 cannot have a
glow lamp in series.
The LD11 responds to the Marmitek X-10 Commands ‘On’, ‘Dim, ‘Bright’, ‘All Lights On’, ‘Off’ and ‘All Off’.
The dimmer is also suitable for use with (low voltage) halogen lighting and most electronic transformers suitable for
phase dimmers (i.e. Osram).
As not every (electronic) transformer can be dimmed in this way, it is recommended that the combination is checked
before installing the system. The module is not suitable for dimming and controlling low-energy light bulbs and tube
lighting. The AD10 should be used for these devices.
The module can be mounted on the DIN Rail and built into a separate casing or into the distribution panel.
Phase and Neutral need to be available before the module can be installed. Operation of the unit with Marmitek
X-10 Commands takes place via the mains wires. This means that no extra wiring is necessary.
|
| | |
| Payment Methods |
| American Express, MasterCard, Visa, Solo, Delta, Switch, Maestro, Visa Electron, Cheque |
|
